Archive for May, 2010
Monday, May 31st, 2010
- More durable and more affordable than plaster or wood!
- Resistant to warping, cracking and peeling
- Impervious to water and insect damage
- Comes factory primed and ready for a finish coat
- Cast from steel molds for maximum durability and
Product Description
Savannah – Crown Molding – Ornate… More >>
Crown Molding White Urethane foam, Savannah – Crown Molding – Ornate
Incoming search terms for the article:
Tags: Crown, foam, Molding, Ornate, Savannah, Urethane, White
Posted in dont-show-ads | Comments Off
Monday, May 31st, 2010
- Crown moldings set the tone of a room with painted crowns creating a colorful or clean look to a room
- Ultralite is a light weight MDF with a consistent smooth surface
- Primed and ready for the paint of your choice
- 5/8-by-4-1/4-by-96-Inch, 4-pack
- Complete your room with matching door and window casings and baseboard moldings
Nucasa UL412P-8 Crown Molding, Primed Ultralite, 5/8-by-4-1/4-by-96-Inch,4-pack
Incoming search terms for the article:
Tags: 5/8by41/4by96Inch4pack, Crown, Molding, Nucasa, Primed, UL412P8, Ultralite
Posted in dont-show-ads | Comments Off
Monday, May 31st, 2010
![]()
Product Description
Purchase includes free access to book updates online and a free trial membership in the publisher’s book club where you can select from more than a million books without charge. Chapters: Chip Carving, Broadaxe, Janka Hardness Test, Architectural Woodwork Institute, Relief Carving, Crown Molding, Tongue and Groove, Jere Osgood, Metabo, Moulder, Wood Grain, Finger Joint, Evert Sodergren, Blind Hole, Moulding Plane, Dust Mask, Riving Knife, Chamfer, Fretwork, Lofting,… More >>
Woodworking: Chip Carving, Broadaxe, Janka Hardness Test, Architectural Woodwork Institute, Relief Carving, Crown Molding, Tongue and Groove
Ultimate Guide to Crown Molding: Plan, Design, Install224 to 608 pages
Trade paper format
8.5" x 10.875"
Complete how-to information
Dozens of step-by-step projects and tasks
Hundreds of color instructional photographs
Dozens of color illustrations
Design and planning information
Dozens of inspirational "beauty" photos
Incoming search terms for the article:
Tags: Architectural, Broadaxe, Carving, Chip, Crown, Groove, Hardness, Institute, Janka, Molding, Relief, Test, Tongue, Woodwork, Woodworking
Posted in dont-show-ads | Comments Off
Monday, May 31st, 2010
- Jig holds molding at correct angle to eliminate complex compound angles.
- With this jig, all you need to do is make a standard 45 degree cut!
- Features easy-to-follow reference guide attached to the jig.
- Can be used on cove and crown molding 2″ to 4-1/2″ wide.
- Fits any 10″ or larger miter saw.
Product Description
Now it’s easy to create a distinct, stylish look with crown molding! Our innovative new compound miter jig makes it simple to cut difficult compound miters with a standard miter saw.
Jig holds molding at correct angle to eliminate complex compound angles. All you need to do is make a 45 degree cut! Features easy-to-follow reference guide attached to the jig. Can be used on cove and crown molding 2″ to 4-1/2″ wide. Fits any 10″ and larger miter saw. Miter Sa… More >>
Rockler Crown Molding Compound Miter Jig
Incoming search terms for the article:
Tags: Compound, Crown, Miter, Molding, Rockler
Posted in dont-show-ads | Comments Off
Monday, May 31st, 2010
- BOSCH crown molding stop supports pair
- The most efficient and inexpensive way to keep you crown molding secure as you cut it
- Enhance the versatility of your miter saw system
- Compatible with BOSCH miter saw models 4412 and 4410
- Each stop measures 1-inch in diameter
Product Description
Bosch miter saw attachments enhance the versatility of your system. Includes: 2 stops – Specifications: Part Number: MS1228, Used on Model No. : 4412, 4410, Sales Pack Quantity: 1, Engineering Number: 2610920588…. More >>
BOSCH MS1228 Crown Molding Stop Supports Pair for 4412 4410 5412L 4410L Miter Saws
Incoming search terms for the article:
Tags: 4410, 4410L, 4412, 5412L, BOSCH, Crown, Miter, Molding, MS1228, Pair, Saws, Stop, Supports
Posted in dont-show-ads | Comments Off
Wednesday, May 26th, 2010
Tags: 1989, Barrel, Building, Ceramic, Crown, February/March, Fine, Homebuilding, Installing, Molding, Number, OVERSIZE, Sinks, Vaults
Posted in dont-show-ads | Comments Off
Wednesday, May 26th, 2010
- No compound cuts necessary
- Eliminates coping of joints
- Curved design matches any spring angle
- Angle-finder included
- Compact design works with most miter saws
Product Description
Kreg Crown-Pro gives trim carpenters and DIY enthusiasts alike a fast and easy way to add beautiful looking crown molding to any room in the house. Adjusts for any spring angle between 30 and 60 degrees Easy to use for inside and outside corners Works with crown molding up to 5-1/2″ wide Includes Angle Finder to ensures accurate results… More >>
Kreg KMA2800 Crown-Pro Crown Molding Tool
Kreg Crown ProThis uniquely designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts. With just four easy steps, you can cut crown molding like the professionals!
Incoming search terms for the article:
Tags: Crown, CrownPro, KMA2800, Kreg, Molding, Tool
Posted in dont-show-ads | Comments Off
Wednesday, May 26th, 2010
- it’s made from solid wood
- elegantly curved lines
- easy to install in a few minutes
Product Description
Crown molding shelf, also call mantel ledge, is made from solid wood. The crown molding shelf is finely routed and sanded with elegantly curved lines. It’s easy to install in a few minutes, comes with all hardware. You can hang several shelves to create library, display and highlight a favorite collectible…. More >>
24″ x 3.25” x 5.25” Corona Crown Molding Shelf Mantel Ledge Espresso
Ultimate Guide to Crown Molding: Plan, Design, Install224 to 608 pages
Trade paper format
8.5" x 10.875"
Complete how-to information
Dozens of step-by-step projects and tasks
Hundreds of color instructional photographs
Dozens of color illustrations
Design and planning information
Dozens of inspirational "beauty" photos
Incoming search terms for the article:
Tags: 3.25'', 5.25'', Corona, Crown, Espresso, Ledge, Mantel, Molding, Shelf
Posted in dont-show-ads | Comments Off
Friday, May 21st, 2010
![]()
Ultimate Guide to Crown Molding Plan,Design,Install
Ultimate Guide to Crown Molding: Plan, Design, Install224 to 608 pages
Trade paper format
8.5" x 10.875"
Complete how-to information
Dozens of step-by-step projects and tasks
Hundreds of color instructional photographs
Dozens of color illustrations
Design and planning information
Dozens of inspirational "beauty" photos
Tags: Crown, Guide, Molding, PlanDesignInstall, Ultimate
Posted in dont-show-ads | Comments Off
Crown Molding White Urethane foam, 78 1/8 in L Juliet - Crown Molding - Ornate78 1/8 in L Juliet - Crown Molding - Ornate
Crown Molding White Urethane foam, Viva - Crown Molding - OrnateViva - Crown Molding - Ornate
Crown Molding White Urethane foam, Paris - Crown Molding - OrnateParis - Crown Molding - Ornate
